================================ ENG ================================

Current driver installation is semi-manual. 
To turn on APIC you have to:

1) Run Installer (install.kex)
2) Wait 3 seconds and get sure that there is a message about succesfull
   file generation /sys/drivers/devices.dat
   Note: log can be found in /tmp0/1/acpi.log
3) Make kernel restart (MENU -> END -> HOME key)
4) Check that kernel and drivers are working well.
5) Save kolibri.img. Now each time you boot APIC would be turned on automatically.

================================ RUS ================================

      ,   .
  APIC :

1)   (install.kex)
2)  3   ,   
      /sys/drivers/devices.dat
       /tmp0/1/acpi.log
3)    ( ->   -> )
4)     
5)  .  APIC      .

 .

   ,       ,   ACPI     IOAPIC  Local APIC.     APIC_init       devices.dat.    ,   IOAPIC  Local APIC,      APIC     IRQ    PCI   devices.dat.

 https://board.kolibrios.org/viewtopic.php?f=1&t=1195&hilit=devices.dat&start=105#p37822